アメリカ合衆国
アメリカ合衆国

myGeobrugg

 - Codelco El Teniente Copper Mine 2016

MINAX® mesh during Installation works with Geobrugg's MESHA® handler - no miners are exposed to work under unsupported hanging walls

 - Codelco El Teniente Copper Mine 2016

Atlas Copco Boltec with MESHA® handler by Geobrugg

 - Codelco El Teniente Copper Mine 2016

Tunnel walls covered with MINAX® 65/4 - thanks to knotted mesh ends, overlapping is minimized

 - Codelco El Teniente Copper Mine 2016

Detail of the ground support with MINAX® mesh, which is nicely following tunnel contour and can be pre-tensioned to minimize deformations during eventual rockbursts

 - Codelco El Teniente Copper Mine 2016

View of the ventilation tunnel at the New Mine Level being supported with MINAX® 65/4 and MINAX® 80/4

 

設置年

2016

状況

El Teniente in Chile is the world largest underground copper mine.  Due to specific rock conditions, the risk of rock bursts is very high.  Since security standards at Codelco are amongst the highest worldwide, margins for failure from rock bursts are very low.  In the past, several rock bursts have affected personnel and operations.

説明

To protect people and equipment at El Teniente, a combination of shotcrete with MINAX® 65/4 and/or MINAX® 80/4 was used.  This solution was successfully tested at Geobrugg's dynamic test center in Walenstadt, Switzerland.  Results were above satisfactory.

In addtion to the MINAX® mesh, installation was completely mechanized with Geobrugg's handler called, MESHA®.  MESHA® increases safety and the efficiency of the ground.

顧客名

Codelco - the National Copper Corporation of Chile / El Teniente mine

保護対象

鉱山/採石場

腐食防止

ジェオブルッグ スーパーコーティング

下請

Salfa Montajes (Salfacorp S.A.) / Züblin International GmbH Chile SpA

担当者の連絡先

Dane Wagner
 

Dane Wagner

Open Pit Mining / Quarries Business Development Manager

鉱山/トンネル
Geobrugg North America, LLC,10700 SW Beaverton Hillsdale Hwy, Suite #470-1,97005 Beaverton / アメリカ合衆国 Open Pit Mining / Quarries Business Development Manager

お問い合わせフォーム