瑞士
瑞士

myGeobrugg

Zandvoort - debris fences at the banked sections

Zandvoort's Banked Turns Completed Ahead of F1 Return

27 二月 2020

The construction of Zandvoort’s unique banking sections has been completed, following the installation of the FIA homologated mobile debris fences by Swiss company Geobrugg.

The two banked sections, which are located at Turn 3 (Hugenholtz) and Turn 14 (Arie Luyendyk), will pose a unique challenge for Formula One drivers when the series returns to the circuit in May. They also posed a major technical challenge for the circuit designers and safety manufacturers. 

The idea for the banking started with a suggestion from Zandvoort’s Technical Director Niek Oude Luttikhuis in consultation with the late FIA F1 Race Director Charlie Whiting on how to make the circuit faster and the racing more spectacular. Italian racetrack designer Dromo Circuit Design then came up with the initial sketches for the banked sections, which feature an incline of 18-degrees at Turn 14 and a steeper incline of 19-degrees at Turn 3. 


Turn 3 will be an incline of 19-degrees

To realise the potential of the circuit upgrades, Dromo drafted in the help of Geobrugg along with US barrier specialist SmithFence and Dutch asphalt company KWS. The result, according to Dromo founder Jarno Zaffelli, is a set of corners that will be challenging for the drivers in a similar way to iconic sections like Eau Rouge and Raidillion at Spa-Franchorchamps or Maggots and Becketts at Silverstone. 

He said: “We did something that we thought would be really formidable to drive, that has no equal at any other racetracks. Turn 14 is quite ample and wide, making it full throttle, whereas the transition between Turn 2 and Turn 3 has a lot of elevation and banking changes. All of your horizon is tilting, all of your perception is evolving, you feel like you are being squeezed. It’s like being in a corkscrew, depending on the line that you are following.” 

The drivers will arrive at the steep Turn 2 full throttle between 260kph and 270kph and then brake hard into Turn 3 (Hughenholtz) to accelerate into Turns 4, 5, 6 - the tightest part of the circuit. This will post a significant technical challenge for the drivers and the engineers when it comes to setup. 

Zaffelli added: “The challenge will be really huge because cars are not designed to sustain such a banking like that, so the teams will have to think about it. Not only from the tyre perspective but also the suspension as well, the handling, going into Turn 2 and Turn 3, and then out of Turn 4 will require a setup that will be a compromise because if you want to go fast there you will have to go slow in another section.”

Part of this will be understanding the bespoke asphalt mix that has been laid on the surface known as ‘Flying Dutch’, named after local hero Max Verstappen and produced on license from KWS. Flying Dutch is a special mixture that is designed to be laid at an angle and should result in fewer marbles from the tyres to enable more lines to be taken by the drivers. It was laid across the circuit earlier this month. 


The mobile debris fences had to be installed at a 90-degree angle to the bankings

With the increased technical challenges that this will present to the drivers, circuit safety has been a key aspect of the banking construction. Geobrugg had to come up with a unique solution whereby the concrete barriers are installed at a 90-degree angle to the track surface and fixed by tethering cables. This is to ensure the safety of the drivers if they leave the track – if they were installed at a vertical angle it would act as a ‘ramp’ and not be effective in the event of a crash. 

This was made with the help of concrete barrier producer NORDBETON, which did a demo installation at its factory, enabling it to define and understand the barrier stability in a banked section. In addition, a pull test was made to determine the friction levels to provide Geobrugg with all necessary input for the stability calculations required.

Jochen Braunwarth, Director of Motorsport Solutions at Geobrugg, said: “We had to take a number of steps to be prepared for the installation of the debris fences at the banked sections. We are pleased that our debris fence solution meets the requirements set out by the suppliers, along with Zandvoort, F1 and the FIA.” 

In addition to Geobrugg’s mobile debris fences, there will be 282 meters of Steel and Foam Energy Reduction (SAFER) barrier installed by SmithFence, whose barrier solution can be seen on many banked ovals for NASCAR circuits and IndyCar. 

Nicholas Smith, Director of Temporary Fence & Motorsport Safety Systems at Smith Fence, said: “The degree of impact and the high projected speed of the turn is a primary reason in which the designers and the FIA have decided to go with the steel SAFER system for the high banked section of the track.” 

The upgrades made to Zandvoort are set to create spectacular racing for fans, a distinct challenge for the drivers, while still maintaining the high safety standards that are defined by the FIA. 


For further info, contact: Jochen Braunwarth, motorsport@geobrugg.com

The creation of Zandvoort's unique banking has been a joint effort between circuit design and safety companies
The creation of Zandvoort's unique banking has been a joint effort between circuit design and safety companies
The creation of Zandvoort's unique banking has been a joint effort between circuit design and safety companies
The creation of Zandvoort's unique banking has been a joint effort between circuit design and safety companies
The creation of Zandvoort's unique banking has been a joint effort between circuit design and safety companies
The creation of Zandvoort's unique banking has been a joint effort between circuit design and safety companies