myGeobrugg
只有设计合理、安装到位的系统才能提供可靠的自然灾害防护。所有我们必须采用已通过1:1模拟现场试验验证的软件来设计。为使我们的系统满足所需求的防护效果,我们提供了以下软件.
请登陆mygeobrugg注册账号以便获取更多软件信息。
ATTERO can predict the behavior of free-hanging attenuators and attenuators with mesh partially lying on the slope.
The software evaluates the maximum forces acting on the mesh and rope throughout the attenuate process.
RUVOLUM® dimensions our SPIDER® and TECCO® System slope stabilization systems.
It determines which forces are stressing the net or mesh and anchor points in relation to geotechnical parameters. The software provides static verification for the overall system.
SPIDER® online tool dimensions the SPIDER® rock protection system, which consists of the high-tensile spiral rope net SPIDER®S3-130 with a strand diameter of 6.5 mm and a mesh width of 130 mm, system spike plates and adequate nailing. The software examines the stability of individual, critical rock blocks and determines the number and location of the required nails along the block's perimeter.
泥石流设计软件 可以通过该软件模拟设计出泥石流防护系统的尺寸等一系列参数。包括泥流方量等数据。该软件是从众多的现场模拟、实验室测试以及工程实际情况得出的数据结果来进行计算设计。点击这里访问
SHALLSLIDE - 浅表层滑坡在线设计软件可您灵活设计浅表层滑坡防护系统,该系统通常由高强度钢丝网、支持绳和上拉锚绳以及一定数量的减压环和钢绞线锚杆组成。该软件以1:1的现场试验为基础,并与研究所合作进行计算机模拟验证。浅表层滑坡在线工具可以对所选择的防护系统进行稳定性分析,并计算冲击过程中的动能。