myGeobrugg
Systeme
Installationsjahr
2011
Ausgangslage
The Polish A1 highway connecting Poland from south to north leads through Silesia. Because of the morphology of the terrain, deep cuts were required. Due to geological conditions and also due to the fact that this area is strongly influenced by the hard coal mining activity, slope stabilization was a must.
Geologie
Marls, silts, sandstones and limestones.
Massnahme
For the following reasons designers together with the Polish National Roads selected TECCO® System as a stabilizing solution:
- complicated ground conditions – about 12 geotechnical layers were described, only 4 of these were rocks and all others soil in different compositions
- there was an apprehension that after digging and taking off such mass of material, there will be a release of the energy and consequently, the slopes will be prone to collapse - which is quite common especially for such high slopes
- the system can be designed and dimensioned against superficial instabilities which offer the possibility to arrange the nails in a more economical way due to the capability of TECCO® System mesh in absorbing and transferring high loads
- when slopes stabilized with TECCO® System are combined with anti-erosion mats, they can regain a natural or vegetated appearance, which is aesthetically preferred.
TECCO® System was designed to protect local instabilities of soil and rock masses. This worked perfectly, as first visible small movements occurred which were stopped by the TECCO® System mesh shortly after installation.
Kunde
General Directorate of National Roads and Motorways
Ausführende Firma
BUDIMEX S.A.
Geschützte Objekte
Strasse
Korrosionsschutz
GEOBRUGG SUPERCOATING
Planer
Complex Project Sp. z o.o. / Transprojekt Kraków Sp. z o.o.
Subunternehmer
Stump-Hydrobudowa Sp. z o.o. / Italcementaciones S.L.U. / PPI Chrobok S.A. / ZRI Chrobok sp.j.
Ansprechpartner
